Fritz Pond Alkalinity Booster
Fritz Pond Alkalinity Booster
Fritz Pond Alkalinity Booster

    Fritz Pond Alkalinity Booster

    $12.99

      About FritzPond Alk Boost

      Fritz Pond Alkalinity Booster is a safe and effective way to raise pond alkalinity. Some buffer products use only sodium bicarbonate to raise alkalinity, which can cause a dangerous “pH bounce”. Fritz Pond Alkalinity Booster contains a full spectrum of buffering agents, helping to prevent “pH bounce.” Alkalinity is the measure of the ability of water to hold a pH of 7.0 or above. Low alkalinity levels may result in pH fluctuations, sometimes severe enough to harm or kill fish. In addition, alkalinity levels below 80 ppm will prevent nitrifying bacteria from effectively reducing nitrite levels, stressing and endangering fish.


        

      Directions & Dosage

      Adjustment Dosage: Use 1 tablespoon per 120 U.S. gallons (454 L) or 1 cup per 2,000 U.S. gallons (7,570 L). Test total alkalinity in pond before use. If pond reads below 120 ppm, add 1 cup per 2,000 gallons of water or one tablespoon per 300 gallons. Wait two hours, retest alkalinity levels, retreat if necessary until desired level is reached. Limit change in alkalinity to 40 ppm per day or less. For best results, spread dosage over several days. Ideal alkalinity is between 120−240 ppm. Do not exceed 400 ppm.


      For best results, dissolve Fritz Pond Alkalinity Booster in separate container of pont water before dosing to high flow area of the pond

      No equipment restrictions necessary

      No contraindications: can be used with all of our other products and meds

      Safe for invertebrates

      Dry products measured by volume (teaspoons, cups, etc) will always give approximate results - use a gram scale if available. If a gram scale is not available, be sure to test for correct concentration after use

      It is recommended to dose in partial increments of 1/3 to 1/2 of the total. Wait 24 hours after first partial dose, check alkalinity levels, dose another portion

      This product becomes hot when mixed with water, use rubber gloves. Avoid contact with eyes, skin and clothing. Wash hands after handling

      Some cloudiness is normal

      Storage: Store in a cool, dry place with lid tightly sealed

      Overdosed? Observe livestock for distress, perform small water changes if needed

      Test for alkalinity with reliable alkalinity test kits

      RELATED PRODUCTS

      RECENTLY VIEWED PRODUCTS